Adventure riding is freedom itself, but it is accompanied by challenges as well. Constant time on the trail or road requires having the communication device, camera, or navigation within easy reach. That is where a Motorcycle Handlebar Mount is a rider's best friend. Riding through rough backroads or states, the correct mount converts frustration into reassurance. Read on in this guide to discover the best hacks to extract the best from your handlebar mounts, how to keep devices safe, and why GRxplore accessories are a bonus on each and every ride.
What is a Motorcycle Handlebar Mount and Why Do Riders Need One
Before we dive into advanced hacks, let us hit the brakes. What is a Motorcycle Handlebar Mount, and why are riders so reliant on it?
Different types of handlebar mounts
Quite literally, a handlebar mount is an add-on that fixes a device such as a phone, GPS unit, or camera to your bike's handlebars. This places your gear in easy sight so you never have to pull over or fish into your pocket on the road. For free spirits, it is never merely a matter of convenience. It is safety and time efficiency.
They come in many forms. Clamp mounts attach using adjustable brackets to grasp bars. Ball and sockets provide riders with the freedom to tilt or spin devices at an ideal angle. Quick locks support fast on and off when quickly needing to pull out a phone. Limited space on the handlebars forces some riders to opt for mirror stem or fork tube mounts. There are strengths to each design, but one consideration in mind: to keep your gear in a stable and visible position regardless of where the road is leading.
Pros of a Motorcycle Handlebar Mount
The biggest plus is safety. The Rider may look at directions while never removing their eyes from the road. Others are increased ease in using cameras, faster communication by riding groups, and increased ease while riding into unfamiliar territory.
Having had an idea of what a Motorcycle Handlebar Mount is all about now, our next question is, how do you derive even higher value from it? That is where it gets truly exciting.
Clever Motorcycle Handlebar Mount Hacks to Make Riding Easier
Riding a horse directly out of the box is good enough, but advanced equestrians will discover that a couple of clever tricks will enhance it even more. What are the cleverest hacks?
Setting up dual device systems
One of the helpful tricks is to establish a dual device setup. With the appropriate base, you're able to attach a secondary arm and attach a secondary device right next to your phone. Just think of having your GPS and an action cam both mounted simultaneously so you never lose a turn or a moment.
Placement and visibility tricks
Another hack is how to position the device in the instrument cluster's shade. This positioning eliminates glare from the sunlight and excludes rain from the screen. Riders in favor of easy access configure universal plates. These enable you to change devices in a matter of seconds without fiddling with tools.
Power and cabling management hacks
Another area where hacks are particularly strong is in charging on the bike. Connect a waterproof USB charger to the bike, and devices are kept topped up all day. Add to this neat cable management using Velcro or spiral wrap, and the cockpit is clean and efficient.
These hacks are simple on their own, but together make an otherwise plain Motorcycle Handlebar Mount into an entire command center. Naturally, safety is an equal priority to each biker. Then how do you protect both the mount and devices when the road is rough?
Protecting Your Motorcycle Handlebar Mount and Devices from Damage
Adventure riding exposes the bike to rough trails, torrential rains, and urban traffic. A bike that will fail in these conditions will be less than useless. Then how do you make it certain that the Motorcycle Handlebar Mount and the device on it will survive the ride?
Fighting vibration problems
First is vibration. Extended periods on gravel will rattle your bike and your mount. That will wear down fragile elements like phone cameras. The answer is easy: incorporate vibration-damping modules or short arms with reduced oscillation. A lot of cyclists incorporate a backup tether so their phone will not go flying if the mount gets slippery.
Weatherproofing for reliability
Then comes the weather. Rain is part of life in adventure. Waterproof cases, rain covers, and even a screen protector with hydrophobic coating will make it possible to keep your device operational even in downpours. A touch of dielectric grease on charge connectors will prevent water damage, too.
Anti-theft strategies
The last issue is stealing. It takes just a split second for a thief to grab an expensive device. Installing security bolts on the base of your Motorcycle Handlebar Mount will deter snap grabs. Or even better, carry your device with you whenever you park.
But let's say you're an adventurous rider on a limited budget. You'd like to upgrade your ride setup but are running short of money. The response here is yes as well, and the subsequent section explains how.
DIY and Budget-Friendly Motorcycle Handlebar Mount Hacks That Pay Off
Not all will necessarily be store-based. Quite a few bikers come up with clever do-it-yourself fixes that are virtually free. Well then, here are a few of the best budget hacks for a Motorcycle Handlebar Mount.
Low-cost stability hacks
One favorite trick is using strips of old inner tube as rubber shims. They fill gaps in clamps, reduce slipping, and even absorb some vibration. A small piece of rubber can make a cheap mount feel like a premium one.
Bolt and hardware repairs
Another inexpensive hack is to apply blue thread locker to your bolts. This prevents screws from loosening on long runs. Marking the bolts with a paint pen will enable easy detection of movement before it becomes a problem.
DIY charging installations
Device powering can be managed within a budget, too. A fused SAE lead wired to the battery provides a solid charger plug on a charger without expensive wiring kits. Install ferrite beads in charging cables to reduce interference on communication devices.
Even cable management has low-cost fixes. Velcro wraps keep wires neat but easy to adjust. And for peace of mind, a simple lanyard tether tied to your mirror stem acts as a backup if your mount fails.
Well, of course, not all ideas are great ideas. Certain mistakes may spoil a ride or even damage your bike.
Let us consider the most frequent mistakes and how to prevent them.
Common Motorcycle Handlebar Mount Mistakes to Avoid
All riders make errors, but with mounts, certain mistakes are expensive. Identifying what to avoid is how you derive more value from your Motorcycle Handlebar Mount while remaining safe.
Overtightening and improper positioning
One of the largest mistakes is over-tightening clamps. It feels hard enough, but too much pressure will shatter plastic pieces or warp bars. Tighten down, but do not overdo.
Another problem is locating the mount too far forward or too high. As enticing as it might be to do so, it will reduce your visibility, introduce unnecessary wind drag, and even put the very mount itself at risk in a wreck. Do it the other way and locate it low and close to your instruments.
Neglecting clearance and temperature
Riders tend to forget steering clearance. Make certain always to have the bars spin all the way left and right with no cables taut. Control-moving mounts are unsafe.
Heat is another unseen problem. The wireless charging in direct sunlight may cause phones to overheat and die. If your device is too warm, change to cable charging and give it some shade.
Selecting low-cost materials
Finally, avoid cheap plastic mounts that are not designed for vibration. While they may save a little money, they often fail when you need them most. Adventure riding demands strong, weather-resistant gear. Which brings us to the next question: why should you trust GRxplore with your mounting needs?
Why GRxplore is Best for Your Motorcycle Handlebar Mount?
There are a lot to choose from, but true riders recognize that it is the quality that matters. Why then should GRxplore be your go-to product to purchase a Motorcycle Handlebar Mount?
Adventure-tested durability
GRxplore cases are designed with an adventure mindset. The cases are subjected to rough ground and vigorous vibration to ensure devices are held fast.
Interchangeable and upgradable design
The design is modular. That means you can start with a simple setup and expand later without replacing everything. It is a system that grows with your needs.
Weather-ready design
They are constructed using long-lasting, weatherproof materials. The rain, dust, and sun will not erode them, and the hardware is rust-proof.
Rider-friendly user usability
They are easy to operate but secure. The locking mechanisms are robust enough to maintain stable retention but provide immediate device access even while wearing gloves.
Backed by support and trust
GRxplore provides the support and reliability required by riders. With easy guides and trusted service, you know you're protected with the knowledge that your investment is supported by riders and enthusiasts.
Comparing these characteristics to off-the-shelf mounts, it is a simple decision. GRxplore provides ruggedness, versatility, and peace of mind.
Conclusion
Handlebar mounts might sound like plain add-ons, but like we have observed, these are necessary equipment for every bike adventurer. Through ingenious positioning tricks to money-saving hacks, a Motorcycle Handlebar Mount is capable of changing up your ride. Safeguarding your devices against vibration, climate, and theft ensures a smooth ride. The avoidance of mistakes saves time, money, and anxiety.
More than anything else, having the appropriate gear prepares you to hit the trail. GRxplore mounts are engineered to handle abusive real-world riding and deliver performance, versatility, and reliability absent in cheap substitutes.
What comes next on the agenda for your rides? Check out the entire GRxplore handlebar mounts series and discover how it will make your adventures easier, brighter, and more exciting. Need some guidance on selecting the perfect setup? Contact us. We are eager to assist in matching up the perfect mount to your expedition.
