When purchasing a new Car Mount, the last thing on your mind is scarring your dashboard with ugly marks. A Car Mount installation may seem easy, but when done improperly, you can end up with scratches, dings, or gooey residue that is difficult to get rid of. Regardless of the purpose – installation for the purpose of navigation, music, or hands-free phone, the purpose is always the same – maintain a clean car and remain connected.
Then, how would you ever ensure that your Car Mount is securely positioned without damaging the dashboard? Well, let's go one by one and discover the safest way possible on how you can install it.
Understanding the Types of Car Mounts
Before you install a Car Mount, you should know about the varieties that exist. They all hook on differently to your vehicle, and some are a heck of a lot kinder to your dashboard than others.
The most popular types of Car Mounts include magnetic, suction, adhesive, vent clip, and CD slot mounts. Magnetic mounts utilize a tiny metal plate that is stuck on the rear part of your phone and attaches to a magnet found on the mount. They are simple, and they have a sleek appearance. Suction mounts, however, depend on the air-tight base that adheres when it comes into contact with smooth surfaces.
Adhesive mounts utilize adhesive pads, whilst vent clip mounts will be stuck on your air vent blades. CD slot mounts slide into your car's previous CD slot, making no contact with your dashboard whatsoever.
Selecting the Ideal Car Mount Ideal for Your Vehicle
If your dashboard is coarse or abrasive, suction mounts may not adhere well. Consider a vent clip mount or a magnetic Car Mount. If you frequently drive in warm weather, adhesive mounts may become soft when exposed to heat, so consider one constructed with high-temperature-resistant material. Consider your daily commute, the interior of your car, and the weight of your phone. A good Car Mount should be solid, easily adjustable, and soft on surfaces in your car.
Having seen your choices, ensure that your dashboard is properly prepared for installation.
Tools and Prep Before Installing a Car Mount
Preparation is key before fitting any Car Mount. It will be worth it in the long run by saving you a few hours of aggravation later on.
Begin by cleaning the surface the device will be mounting on. It is ideal when done with a mild cleaner and one soft microfiber towel. Never use harsh chemicals, such as ammonia or alcohol, as these will dry out or stain the dashboard. Get the surface dry before proceeding any further.
It's also a good idea to try the position before you secure the Car Mount. Position it gently on the location and sit in your regular driving stance. Can you easily see your phone? Is it in the way of your air vents or windscreen vision? Make any slight adjustments before making the change permanent.
When the location is acceptable, installation can be started.
Step-by-Step Guide to Installing a Car Mount Without Damage
Installing a Car Mount correctly doesn't take long, but performing the installation with care comes into the equation.
Begin with the suction mounts. If yours has a plastic disc, adhere that one to the dashboard initially. Your Car Mount's suction cup should adhere to the disc, not to your dashboard directly. This little trick prevents surface damage on your car and facilitates easy removal later on.
When you have adhesive mounts, peel the adhesive film off the attachment pad. Press the mount firmly into position for approximately 30 seconds in order to get a solid bond. Then, let the adhesive harden up for a few hours before setting your phone on the mount. This prevents the adhesive from sliding.
If you have a magnetic Car Mount, align the metal plate on your phone or on the inside of your case. Secure the mount on the surface you like, ensuring the magnet is pointing towards the plate forward. This keeps your phone stable and balanced.
The vent mounts are the easiest of all. Just install the clip on your vent air and make sure that it is securely in place. Never push too hard, as vent blades get easily damaged.
Tips to keep your dashboard in pristine condition
After you've installed your Car Mount, don't put it under direct sunlight for prolonged periods, especially right after installation. Glue and suction cups can degrade when they're exposed to heat. Wipe the surface every now and then with a soft cloth to prevent dust from accumulating.
Your dashboard will be dust-free, as will be your Car Mount, if these little precautions are always kept in mind.
With your mount all ready, let's have a look at the errors that can nullify all that you have done.
Common Mistakes to Avoid When Installing a Car Mount
Even the finest Car Mount can be destructive when installed the wrong way. Everybody's very first mistake is that they buy a low-quality mount. Cheap adhesives will peel off or leave indelible marks. Always buy a well-established brand that assures surface protection.
Another error is overlooking the cleaning process. Dust or oils don't allow the adhesive or suction to adhere well. They make mounts fall off or migrate after a few days.
You should also refrain from installing a Car Mount on a depressed or irregular section of the dashboard. It may seem convenient, but that mount will not hold securely and can easily slide off.
Finally, don't be lured to move your Car Mount as soon as you have installed it. Let the adhesive settle before you make any moves. It is these small details that can be the difference between how much time your mount will last.
Since you know what not to do, let's go through what you should do when you need to shift or unseat your mount without any risk.
How to Remove or Reposition a Car Mount Safely
There will be a time when you would want to relocate or uninstall your Car Mount, particularly when you get a new car or when you have to relocate it for easy viewing. Careful uninstallation prevents damaging your dashboard.
To install suction mounts, pull gently on the small tab on the bottom to release the vacuum seal. After the pressure is released, slowly raise the mount. Remove any leftover material by wiping with a damp cloth.
For adhesive mounts, apply a low-heat hair dryer for 30 seconds, then loosen the adhesive. Slip a plastic card or removal tool under the base and carefully raise it. Never use metal tools, as these will scratch the surface.
Clean the surface afterward with a gentle cleaner, and your dash will be as good as new.
Having dealt with removals, we can now talk about why GRxplore Car Mounts are the best bet for anybody who is particular about convenience as well as care.
Why Choose GRxplore Car Mounts and Accessories
GRxplore Car Mounts are built of premium material that will protect your dashboard as well as give you a sturdy, sleek installation. Tested for heat resistance, durability, and grip, each one of our mounts can withstand the heat, slip, or sticky goo on your dashboard, even on scorching summer drives.
Our mounts have everything you require for a secure installation, such as cleaning wipes, protection discs, and additional adhesive pads. They will accommodate almost any phone, tiny compact styles all the way up through gargantuan smartphones, with your view always unimpaired.
Selecting a GRxplore Car Mount is choosing reassurance. You get something that is easy to put on, easy to take off, and soft on your car. It blends into any car interior with its sleek design, and the firm grip keeps your phone stable even on bad roads.
We have many fans who adore GRxplore as we marry function with protection. Regardless of whether you like the magnetic, vent clip, or suction mounts, there is one that will suit your requirements ideally.
Why, then, is GRxplore special among other brands? It's the promise that you will never be bothered by damage, residue, or instability.
Conclusion
Getting a Car Mount should make driving easier, not stressful. By learning the correct kinds of mounts, properly getting your dashboard ready, and adhering to gentle installation instructions, you will be able to experience the hands-free setup without damaging your car's interior.
Don't cut corners, keep things spotless, and acquire a quality mount that values your vehicle as you do.
Time to upgrade your driving setup? Browse GRxplore's premium collection of Car Mounts and accessories today. Confused about how to get the absolute best model for your vehicle? Contact our happy team at GRxplore today for personalized recommendations — we're just waiting to assist you in confidently and securely mounting your phone.
FAQs
1. Will the Car Mount destroy the dashboard?
Yes, if properly installed. Always wipe the surface clean and use mounts featuring protection discs or gel bases to avoid leaving any marks.
2. On dashboards, Which Car Mount Is the Safest?
Vent and suction mounts with protection discs are the safest, as these don't allow adhesive contact.
3. How do I remove a Car Mount without any residue?
Use soft heat from a hair dryer, then gently pick up the section with a plastic card and wipe it with a soft cloth.
4. Will GRxplore car mounts be dashboard-mounted?
Yes. They are built with non-marking, heat-resistant material to provide lasting protection.
